T-type thermocouple AWG24 with Teflon PFA insulation 3ft with bare end and stainless
- T-type 3ft PFA no plug and SS
- 0.20 LBS
- Calculated at Checkout
Bulk discount rates
Below are the available bulk discount rates for each individual item when you purchase a certain amount
|Buy 10 - 50||and get 10% off|
T-Type Thermocouple for Digital Thermometer
- 1 thermocouple with Teflon PFA insulation and 3" Stainless Steel cover -
-320 to 500°F (-200 to 260°C)
This is a flexible T-type Thermocouple for use in a wide range of lower temperature applications, such as environmental monitoring, fridges and freezers, ovens, wood kilns, laboratory and science use. The probe is made from AWG 24 Gauge T-type thermocouple wire and is rated for continuous use at from -320 °F up to 500 °F Fahrenheit (or -200 °C to 260 °C) . The t-type thermocouple is covered with a 1/8 inch (3mm) diameter and 3" (75 mm) long stainless steel tube. This type T Thermocouple Probe is made without T-type Thermocouple plug, the wire ends can be connected to a screw terminal of a thermometer or temperature controller or you can use your own plug. T-type thermocouples are frequently used when a higher accuracy than K-type thermocouples is needed. But they have a smaller upper measurement range.
Temperature Range: Continuous use up to 500 °F or 260 °C
ANSI color coded Teflon PFA insulation, red = -, blue = +, outside blue , AWG24, 0.5 mm diameter
Wire length: approx. 3 ft / 95 cm
Probe Diameter: 1/8"
Bare wire end, no connector