3/22    We are back in office and can ship orders quickly again.

MN Measurement Instruments™

T-type thermocouple AWG24 with Teflon PFA insulation 3ft with bare end

(No reviews yet) Write a Review
SKU:
T-type 3ft PFA no plug
UPC:
740223637705
MPN:
T-type 3ft PFA no plug
Weight:
0.20 LBS
Shipping:
Calculated at Checkout

Bulk discount rates

Below are the available bulk discount rates for each individual item when you purchase a certain amount

Buy 10 - 50 and get 10% off
  • T-type thermocouple AWG24 with Teflon PFA insulation 3ft with bare end
  • T-type thermocouple AWG24 with Teflon PFA insulation 3ft with bare end
USD7.99

Description

T-Type Thermocouple for Digital Thermometer

- 1 thermocouple with Teflon PFA insulation -

-320 to 500°F    (-200 to 260°C)

This is a flexible T-type Thermocouple for use in a wide range of lower temperature applications, such as environmental monitoring, fridges and freezers, ovens, wood kilns, laboratory and science use. The probe is made from AWG 24 Gauge T-type thermocouple wire and is rated for continuous use at from -320 °F up to 500 °F Fahrenheit (or -200 °C to 260 °C) . The t-type thermocouple is about 0.1 inch in diameter. This type T Thermocouple Probe is made without T-type Thermocouple plug, the wire ends can be connected to a screw terminal of a thermometer or temperature controller or you can use your own plug. T-type thermocouples are frequently used when a higher accuracy than K-type thermocouples is needed. But they have a smaller upper measurement range.

Specification:

Thermocouple: T-Type
Temperature Range:
Continuous use up to 500 °F or 260 °C
ANSI color coded Teflon PFA insulation, red = -, blue = +, outside blue , AWG24, 0.5 mm diameter
Wire length: approx. 3 ft / 95 cm
Probe Diameter: 0.1 inch (2.5 mm)
Bare wire end, no connector

View AllClose

I am on Mastodon