K-Type Thermocouple Wire Temperature Probe Sensor TC-1

(No reviews yet) Write a Review
SKU:
TC-1 1pc
UPC:
096802969799
Condition:
New
Availability:
Ships within 24 hours and will arrive anywhere in the US in 2-4 days.
Weight:
0.20 LBS
Shipping:
Calculated at Checkout

Bulk discount rates

Below are the available bulk discount rates for each individual item when you purchase a certain amount

Buy 2 - 10 and get 5% off
Buy 11 - 20 and get 10% off
Buy 21 - 50 and get 15% off
  • K-Type Thermocouple Wire Temperature Probe Sensor TC-1
  • K-Type Thermocouple Wire Temperature Probe Sensor TC-1
  • K-Type Thermocouple Wire Temperature Probe Sensor TC-1
USD5.34

Description

 

K-Type Thermocouple TC-1 for Digital Thermometer

 

- 1 single k type thermocouple with miniature connector -

 

-328 to 399°F (-200 to 204°C)

 

This is a reliable k-type wire thermocouple TC-1 with a standard k-type sensor. The sensor bead is at the tip of a 3 ft long wire probe, which has a green FEP plastic coating. This teflon FEP based insulation is easier to clean than fiber glass insulation and can be used up to 399 degree Fahrenheit, or 204 degree Celsius. The thermocouple has a miniature k-type connector that will work with digital K-type thermometers of many manufacturers, such as Fluke, Omega, Testo, BK Precision, and Nicety.

 

This fast reacting k type thermocouple is made from very thin k-type sensor wire, the thermocouple wire diameter is approximately AWG 30 (0.25 mm), this will give you very quick temperature readings.

 

This probe can used to measure air or gas temperatures, it can be attached to pipes or embedded into objects you want to measure. It also can be used in non-corrosive liquids, such as water that does not have much salt or acid in it.

 

This K-type thermocouple TC-1 will read very low temperatures and can be used for cryogenics with liquid nitrogen or dry ice, as long as you have a suitable digital thermometer. I have tested this down to -328°F (-200°C) with my thermometer Nicety DT1311 and DT1312. The Nicety DT804 and DT804A only measure to -58°F / -50°C.

 

 

 

New: Now this k-type thermocouple is also available in custom length. We will shorten this thermocouple wire to the exact length you need and weld a new temperature sensor bead to it. We also offer thermocouple welding and can repair your existing thermocouples. Contact me for details and prices.

 

Specification:

 

Thermocouple: K-Type ( chromel / alumel )
Temperature Range: -328 to 399°F (-200 to 204°C)

Wire thickness: AWG 30, 0.25 mm
Wire insulation thickness: oval, 0.039 by 0.079 inch (1 by 2 mm)
Wire length: 36 inch / 91 cm
Bead Diameter: 0.03 - 0.07 inch (0.7 – 1.7 mm)
Miniature K-Type connector, two flat blades,
   
7/16" (10mm) from outside pin to outside pin, pins are flat, spade type

 

If your meter uses two round connectors, we have an adapter from miniature k-type thermocouple to banana plug.

 

View AllClose

Warranty Information

1 year warranty
View AllClose