Higher Temperature K-Type Thermocouple for Digital Thermometers PK-700-no-plug 6ft
- in stock
- 0.20 LBS
- Calculated at Checkout
K-Type Thermocouple for Digital Thermometers PK-700
-320 to 1292 °F (-200 to 700 °C)
This is a reliable thermocouple wire with a K-Type beaded sensor. The sensor bead is at the tip of a 6 ft long wire probe, which has a high temperature fiberglass insulation, good up to 1292 degree Fahrenheit. We now secure the fiberglass with thin thermocouple wire, so you will not have a melting plastic heat shrink tube at the tip.
This high temperature K-type thermocouple has no connector, it needs to be put in a screw terminal of a meter or PID controller.
This thermocouple will read very low temperatures, if you have a suitable thermometer. I have tested this down to -350°F (-210°C) with the DT1311 or DT1312 thermometer.
Thermocouple: K-Type ( chromel / alumel )
Temperature Range: -320 to 1292 °F (-200 to 400 °C)
Wire length: approx. 6 ft / 200 cm
Probe Diameter: 0.06 inch (1.6mm)