MN Measurement Instruments™

14.5" High Temperature k-type Thermocouple Sensor Ceramic Kiln Furnace

(1 review) Write a Review
SKU:
CR-02 14.5"
UPC:
708828923432
MPN:
CR-02-14.5
Condition:
New
Availability:
in stock
Weight:
0.50 LBS
Shipping:
Calculated at Checkout
  • 14.5" High Temperature k-type Thermocouple Sensor Ceramic Kiln Furnace
  • 14.5" High Temperature k-type Thermocouple Sensor Ceramic Kiln Furnace
  • 14.5" High Temperature k-type Thermocouple Sensor Ceramic Kiln Furnace
  • 14.5" High Temperature k-type Thermocouple Sensor Ceramic Kiln Furnace
  • 14.5" High Temperature k-type Thermocouple Sensor Ceramic Kiln Furnace
  • 14.5" High Temperature k-type Thermocouple Sensor Ceramic Kiln Furnace
USD29.99

Description

K-Type Thermocouple CR-02-14.5" for Digital Kiln Thermometer

- One 14.5" long thermocouple with high temperature ceramic tube insulation -

- connector plate for wiring included -

-58 to 2372°F    (-50 to 1300°C)

This is a heavy duty K-type Thermocouple for use in kiln, forge and furnace applications. The probe is made from AWG 8 gauge thermocouple wire and is rated for continuous use at very high temperatures up to 2372 °F Fahrenheit or 1300 °C Celsius. The k-type thermocouple is about 14.5 inch in total length, and the 10 insulation tubes are about 11 inch long. A connector plate for wiring the probe to your k-type thermometer or a temperature controller is included.

This type K Thermocouple Kiln Probe is made with 10 ceramic insulators, each about 1 inch long, and it allows you to adjust the probe length by removing insulator elements and shortening the wire to your exact requirement. It is also available as 8.5 inch and 18.5 inch K-type thermocouple probe.

If you need a cable to connect this temperature sensor to your digital thermometer, we recommend the CR-4 hook-up cable, please look here:

https://www.meter-depot.com/connector-hookup-cable-f-high-temperature-k-type-ceramic-thermocouple-sensor-cr4/

This k-type thermocouple is frequently used in ceramic ovens, kilns and furnaces, in pottery ovens, metal working, forge and smelter, metal manufacturing and whenever you need to measure and control very high temperatures.

Ships quickly from St Paul, Minnesota, USA. If you have questions we can help.

Specifications:

  • K-type Thermocouple Probe

  • Measurement Range -58 to 2372 °F (-50 to 1300 °C)

  • "Select" or "Class 1" thermocouple wire, tight tolerance, +/- 1.5 degree C up to 375 °C or 0.4% above 375°C
  • Wire Diameter: AWG 8, 0.13” or 3.2 mm

  • Total length: 14.5 inch (37 cm)

  • Insulated length: 11 inch (29 cm)

  • Ceramic Insulator, oval shape: L~ 0.5” W~ 0.4” (L=12.3mm W=10mm)

View AllClose

Warranty Information

1 year warranty
View AllClose

1 Review

  • 5
    14.5" HIGH TEMPERATURE K-TYPE THERMOCOUPLE SENSOR CERAMIC KILN FURNACE

    Posted by Pavel Shinkeyev on 25th Jan 2023

    Great product, very tough. I put it Inside of the pan with rocks in my gas powered wet sauna heater so tip of the sensor was in direct contact with glowing red metal button sitting right above 120,000 BTU gas jet burner and ran it for 4 hours straight at 630C ( 1166F ).From time to time I was pouring water right into that area to generate a lot of steam. Sensor handled it with no problem at all with steady response. I ordered 2 by accident but I'm glad I did and I'm going to keep them both. it's very helpful to know temperature of the rocks at the bottom of the heater before pouring water on them.

View AllClose

I am on Mastodon