Specialty Thermocouples
-
Screw-In K-type Thermocouple - Specialty
USD42.99This is a specialty type K thermocouple. It is potted on a through-hole of a stainless steel 8-32 screw that is 1/2 inch long. The thermocouple tip protruded about 1/10 inch from the bottom of the screw. The thermocouple is potted inside the screw using...USD42.99 -
Specialty Type K Thermocouple - Replacement for old kiln
USD22.00This is a specialty Type K thermocouple for an old annealing kiln / oven. The wire is about 13 inch long and 2.05 in diameter (about AWG12). It comes with 10 round insulators, approx 1/2 inch diameter. The red mark shows the (-)...USD22.00 -
Solder Iron Tip Temperature Probe Type K
MN Measurement Instruments™
USD12.99This is a specialty thermocouple to measure the temperature of the tip of a solder iron. Normal Type K thermocouples do not wet out with solder, they reject it and therefore do not make good contact with the tip of a solder iron. The tip of this probe is...USD12.99 -
5 ft K-type Thermocouple AWG30 with PFA fluoropolymer insulation and no plug
MN Measurement Instruments™
USD7.90This is a specialty K-type thermocouple: Standard K-type wire AWG30 with double PFA fluoropolymer insulation, good to 260 deg C (500 deg F) Outer dimensions approx 1.2 x 0.8 mm ANSI color code: red is (-), yellow is (+), outer insulation...USD7.90 -
18 inch long K-type thermocouple for a Denver Glass Kiln
USD45.00This is a specialty K-type thermocouple for a Denver glass kiln. The total length is about 20 inches The ceramic sensor is about 6 1/4 to 6 1/2 inch long, including the twisted tip. Thickness of the ceramic insulator is about...USD45.00 -
12 ft T-type Thermocouple AWG30 with PFA Fluoropolymer insulation and no plug
MN Measurement Instruments™
USD12.60This is a specialty T-type thermocouple: Standard T-type wire AWG30 with double PFA fluoropolymer insulation, good to 260 deg C (500 deg F) Outer dimensions approx 1.2 x 0.8 mm ANSI color code: red is (-), blue is (+), outer insulation...USD12.60 -
15 ft T-type Thermocouple AWG30 with PFA Fluoropolymer Insulation and no plug
USD15.70This is a specialty T-type thermocouple: Standard T-type wire AWG30 with double PFA fluoropolymer insulation, good to 260 deg C (500 deg F) Outer dimensions approx 1.2 x 0.8 mm ANSI color code: red is (-), blue is (+), outer insulation...USD15.70 -
15 ft K-type Thermocouple AWG30 with PFA fluoropolymer insulation and no plug
USD15.70This is a specialty K-type thermocouple: Standard K-type wire AWG30 with double PFA fluoropolymer insulation, good to 260 deg C (500 deg F) Outer dimensions approx 1.2 x 0.8 mm ANSI color code: red is (-), yellow is (+), outer insulation...USD15.70 -
Specialty Thin High Temperature K-type Thermocouple 0.25mm
MN Measurement Instruments™
USD19.99This is a specialty thin high temperature type K thermocouple for high surface temperature measurement. The k-type thermocouple has a 6 inch bare metal end with a small welded sensor bead. ANSI type K, standard accuracy 6 inch bare wire end,...USD19.99 -
K-Type Thermocouple with Kapton Insulation and Disk 1 ft
MN Measurement Instruments™
USD8.99K-Type Thermocouple with Kapton Insulation Welded to Disk -320 to 752°F (-200 to 400°C) This is a specialty K-type thermocouple wire probe made from AWG#24 stranded wire, which has a high temperature Kapton plastic insulation,...USD8.99 -
Specialty K-type Thermocouple Set 25ft, 32ft, 36ft and 40 ft
USD109.99Specialty K-type Thermocouple Set 25ft, 32ft, 36ft and 40 ft This is a set of K-type Thermocouple made from yellow AWG24 k-type thermocouple wire with PVC insulation. The tip is welded and the the thermocouple has a miniature K-type...USD109.99 -
Complete Spare Tip for Contact Tachometer TC801B
USD8.99This is a complete spare tip for our photo and contact tachometer model TC801B. Comes with the cone, shaft, the speed measuring wheel and 3 cones.USD8.99