Specialty Type K Thermocouple - Replacement for old kiln
(No reviews yet)
Write a Review
- SKU:
- K-Specialty-12 in
- Weight:
- 0.50 LBS
- Shipping:
- Calculated at Checkout
Description
This is a specialty Type K thermocouple for an old annealing kiln / oven.
The wire is about 13 inch long and 2.05 in diameter (about AWG12). It comes with 10 round insulators, approx 1/2 inch diameter.
The red mark shows the (-) contact of the sensor.
Related Products
Related Products
Screw-In K-type Thermocouple - Specialty
USD42.99
This is a specialty type K thermocouple. It is potted on a through-hole of a stainless steel 8-32 screw that is 1/2 inch long. The thermocouple tip protruded about 1/10 inch from the bottom of the...
4 inch K-type Kiln Thermocouple 3/16" Diameter
MN Measurement Instruments™
USD39.99
4" K-type Kiln Thermocouple
3/16" ceramic insulators fit 1/4" kiln hole
This is a high temper
18 inch long K-type thermocouple for a Denver Glass Kiln
USD45.00
This is a specialty K-type thermocouple for a Denver glass kiln.
The total length is about 20 inches. The ceramic sensor is about 6 1/4 to 6 1/2 inch long, including the twisted tip. The...
Specialty Thin High Temperature K-type Thermocouple 0.25mm
MN Measurement Instruments™
USD19.99
This is a specialty thin high temperature type K thermocouple for high surface temperature measurement. The k-type thermocouple has a 6 inch bare metal end with a small welded sensor bead...
14.5" High Temperature k-type Thermocouple Sensor Ceramic Kiln Furnace
MN Measurement Instruments™
USD33.99
K-Type Thermocouple CR-02-14.5" for Digital Kiln Thermometer
- One 14.5" long thermocouple with high temperature ceramic tube insulation -